Quilt Blocks of the States - Virginia

Quilt Blocks of the States - Virginia
Virginia - 12" Quilt Block

The next block in our State Quilt Block Series is Virginia This block is quite simple, and would look great used in a 5 across, 7 down format on a quilt.

To print out the templates for E & Er templates Click here.
To print out the “Set in Seams” PDF Click here



Here's a black and white map for easy identification of templates and their location:




Cutting Instructions



Light Fabric (Crème):
  • cut one 5¼” square, and cut diagonally twice to make 4 triangles (C)
  • cut four x 3½” squares, (A)




  • Medium Fabric (Yellow):
  • cut four 2 ⅞” squares, and cut diagonally once to make 8 triangles (D)



  • Medium Dark Fabric (Red):
  • cut one 4½” square (B)



  • Dark Fabric (Violet):
  • cut eight 4 ¾” x 2 ½” rectangles. Place the template E on four rectangles and cut out; place the template Er on four rectangles and cut out.
  • cut four 1½” x 3½” rectangles (G)
  • cut four 1½” x 4½” rectangles (F)



  • Sewing Instructions:

    Step 1: Cut out all of the pieces required according to the template map above and lay them out on your work surface.

    Step 2: Make four corner units. Take four A templates, four G templates and sew the G templates to one side of the A templates. Then take two F templates and sew to the right side of the two AG units (see diagram). Then take two F templates and sew to the left side of two AG units (see diagram)


    Step 3: Make four inner units. Take four E templates and four ER templates and sew them together on the short side (see diagram)


    Step 4: Take eight D templates and sew to each side of the EER unit. Then take four C templates and sew into the top sections of the EERDD unit, using Set In Seams technique.


    Step 5:Sewing top row together. Take two corner units and sew them to one of the EERDDC units (see diagram)


    Step 6:Sewing middle row together. Take two inner units and sew them to either side of the B template (see diagram)



    Step 7:Sewing bottom row together. Take two corner units and sew them to one of the EERDDC units (see diagram)






    Your block should measure 12-1/2" on all sides. It will measure 12" finished size when it is sewn into a quilt.



    You Should Also Read:
    Quilt Blocks of the States Series

    RSS
    Related Articles
    Editor's Picks Articles
    Top Ten Articles
    Previous Features
    Site Map





    Content copyright © 2023 by Judie Bellingham. All rights reserved.
    This content was written by Judie Bellingham. If you wish to use this content in any manner, you need written permission. Contact Judie Bellingham for details.